<code>
Title:estim and whip adjust
Sex: Female T Male T Trans T
Require: crop
Limits: Pain-N
;Estim and whip adjustment by Chissoku
label:redo_adj
image:taskimg/teacher1.jpg
show:So before we get started I want you to chose your level of pain threshold. If you have not tried this before DO NOT take the high pain threshold, Seriously! <br><br>You do however get a chance to readjust after testing is done but before the actual task starts.<br><br>So SNAME, which pain threshold will it be?
choice: Normal, High
if:LASTASK == 1
  settemp1:'whip_low.wav'
  settemp2:'whip_mid.wav'
  settemp3:'whip_high.wav'
fi:
if:LASTASK == 2
  settemp1:'whip_mid.wav'
  settemp2:'whip_high.wav'
  settemp3:'whip_full.wav'
fi:
show:If you have an estim device SNAME, let’s adjust it appropriately and get you ready. <br><br><br>If for any reason you are unable to use your estim device now, we will instead establish the strength of the whip with which you will hit.<br><br>So confirm which you will use, if you chose your sound triggered estim then make sure it is attached and ready to use, if not then go get your best spanking implement. which will it be slave?
choice: sound triggered estim, I will be using a whip
if:LASTASK == 1
  goto:estim_adj
fi:
if:LASTASK == 2
  goto:whip_adj
fi:
label:estim_adj
image:taskimg/teacher4.jpg
show:Good slave, we need to do 2 adjustments first to establish the base setting. I will start to play the whip sound every second. Turn the power output from the estim down low, something like 20% then turn the volume up until you get a good signal response from the estim but the estim power should be low enough that you can feel it without it being overly painful for this first adjustment.
button:Understood DTITLE
image:taskimg/teacher8.jpg
show:So first turn up the sound volume until you get a good signal to the estim device.
button:Adjusting volume now
;
loop:13
  sound:whip_low.wav
  wait:1
endloop:
;
show:Good slave, now lets turn up the power of the estim until you can actually feel it. You should turn up the estim power until you are able to feel an uncomfortable tingling.<br><br><h4>This will be the Low setting</h4>
button:Adjusting power now.
;
loop:13
  sound:TEMP1
  wait:1
endloop:
;
show:Good slave, now let see the effects of the Medium setting ;)
button:Understood, Im ready
;
loop:5
  sound:TEMP2
  if:LOOPVAR == 2
    cam:
  fi:
  wait:1
endloop:
;
image:taskimg/smirk.jpeg
show:ha ha ha excillerating isnt it? ;) are we ready for for the high setting? get handcuffs if you need to. High will only fire 3 times.
button:Understood, I'm ready DTITLE I think
;
loop:3
  sound:TEMP3
  wait:1
endloop:
;
show:Well done, and now I will play the following sequence low medium high SNAME so you get the live comparison, prepare yourself! and no I'm not waiting hope you are not still handcuffed ? ha ha ha
wait:6
;
loop:3
  sound:TEMP1
  wait:1
  sound:TEMP2
  wait:1
  sound:TEMP3
  if:LOOPVAR == 1
    cam:
  fi:
  wait:1
endloop:
;
image:taskimg/teacher8.jpg
show:Very good slave, are we all set then?
;  /////// jump to end of task //////
goto:ready_or_not
; start the whip adjustment
label:whip_adj
image:taskimg/teacher4.jpg
show:Good slave, now I will start to play the whip sound every second. Turn the sound up until you can hear the whip at a normal sound level, and smack yourself with enough force that you can feel it without it being overly painful. Keep in mind that as the volume goes up I expect you to smack yourself harder!
button:Understood DTITLE
image:taskimg/teacher8.jpg
show:So first turn up the sound until it is at a normal volume.<br><br><h4>This will establish the base setting</h4>
button:Adjusting volume now
loop:7
  sound:whip_low.wav
  wait:1
endloop:
show:Good slave, now let see you smack yourself at the rhythm of the sound and match force with volume of the sound.<br><br><h4>This will be the Low setting</h4>
button:Adjusting force now.
;
loop:7
  sound:TEMP1
  wait:1
endloop:
;
show:Good slave, now let see you smack yourself at the rhythm of the sound and match force with volume of the sound.<br><br><h4>This will be the Medium setting</h4>
button:Understood adjusting force DTITLE
;
loop:5
  sound:TEMP2
  wait:1
endloop:
;
show:So let see you smack yourself at the rhythm of the whip sound and match power to the sound.<br><br><h4>This is the High setting!</h4>
button:Understood adjusting force DTITLE
loop:5
  sound:TEMP3
  wait:1
endloop:
;
show:Well done, and now I will play the following sequence low low medium medium high high SNAME, prepare yourself!
button:Im ready DTITLE
loop:3
  sound:TEMP1
  wait:1
  sound:TEMP1
  wait:1
  sound:TEMP2
  wait:1
  sound:TEMP2
  wait:1
  sound:TEMP3
  wait:1
  if:LOOPVAR == 3
    cam:
  fi:
  sound:TEMP3
  wait:1
endloop:undefined
;
image:taskimg/teacher8.jpg
show:Very good slave, are we all set then?
;
label:ready_or_not
; Ask if the slave needs to redo the adjustment maybe at different level
choice:I need to readjust a little DTITLE , All ready DTITLE
if:LASTASK == 1
  goto:redo_adj
  if:LASTASK ==2
    goto:ready
  fi:
  ;return ready to use
  label:ready
  show:Good slave, let’s get started then shall we?
  ;Return to the actual task that needed the adjustment
fi:
;
;
;
;
</code>