remote_relay
Differences
This shows you the differences between two versions of the page.
|
remote_relay [2016/06/21 10:23] liz created |
remote_relay [2016/06/21 10:31] (current) liz |
||
|---|---|---|---|
| Line 24: | Line 24: | ||
| You will need to add your Jennifer ID in the INI file. I then did a couple more tests to check all was working with Liz's app and the relays all worked as expected first time, showing a red light as they activated for 1 second each! | You will need to add your Jennifer ID in the INI file. I then did a couple more tests to check all was working with Liz's app and the relays all worked as expected first time, showing a red light as they activated for 1 second each! | ||
| - | Pic | + | {{ ::wifi1.jpg?nolink&400 |}} |
| - | https://fetlife.com/users/5049216/pictures/48382175…] | + | |
| Ok so now needed to link every together to my equipment. I bought 2 3.5mm mono sockets and a 3.5mm patch lead. This allowed me to plug my e-stim butt plug etc direct to the relay and then use the patch lead to connect to my e-stim device without cutting any wires or messing with my expensive device. you will see from the picture the relay just switches the tip and the other contact is just passed direct from one socket to the other. | Ok so now needed to link every together to my equipment. I bought 2 3.5mm mono sockets and a 3.5mm patch lead. This allowed me to plug my e-stim butt plug etc direct to the relay and then use the patch lead to connect to my e-stim device without cutting any wires or messing with my expensive device. you will see from the picture the relay just switches the tip and the other contact is just passed direct from one socket to the other. | ||
| My other device is a maglock so have wired on the other relay contact so it stays locked unless Jennifer presses release. | My other device is a maglock so have wired on the other relay contact so it stays locked unless Jennifer presses release. | ||
| + | |||
| + | {{ :wifi2.jpg?nolink&400 |}} | ||
| As it is I have a fully working system but I plan to power the device from 3xAA batteries instead of a plugin adapter and put in a plastic box. I will also add some connectors for me to easily attach/detach the maglock for discrete storage but will see if my soldering is up to doing that. | As it is I have a fully working system but I plan to power the device from 3xAA batteries instead of a plugin adapter and put in a plastic box. I will also add some connectors for me to easily attach/detach the maglock for discrete storage but will see if my soldering is up to doing that. | ||
| In summary I was surprised with how easy it was to do this. | In summary I was surprised with how easy it was to do this. | ||
remote_relay.1466504600.txt.gz · Last modified: 2016/06/21 10:23 by liz
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
